Free Estimate(970) 222-4740

Identifying Smoke Detector Problems Near You

Smoke detector problems can crop from a variety of reasons. Know the possible causes and how you can resolve them temporarily to ensure your smoke detector is functioning properly.

If you have hired expensive electrical contractors to mount a smoke detector to protect your home from fire hazards, it’s naturally frustrating when it acts up for no reason at all. Often, we think there is no reason behind the annoying alarms because we can’t see the faulty wiring or any invisible problem. If you are tired of the alarm going off, we can help you in troubleshooting smoke detectors.

Smoke Detector Problems

How To Troubleshoot Smoke Detector Problems?

Battery Replacement

A battery change is long overdue? That constant beeping could be a reminder to get on the clock and replace the battery at least twice every year. Old batteries can corrode the wiring or receptacle, leading you to replace the entire unit.

Not Conducting Monthly Reliability Test

Your batteries could be entirely new, and even then, you could need a replacement of smoke detectors because they are not passing the reliability test. Smoke alarm malfunction can cost you life or property damage. If they don’t pass the test, replace them.

Installing Similar Smoke Detectors

There are different kinds of fires, and that’s why you need different types of smoke detectors. Smoldering flames and flaming fires need photoelectric and ionization detectors, respectively. Don’t get the same type of smoke detector, and get at least one of each kind.

Not Replacing The Old Smoke Detectors

The date on smoke detector is not a suggestion, but the date of the smoke detector expiration. After this, your trusty old beeper might not be working as actively and accurately as you are hoping. 

When should smoke detectors be replaced? If you have passed the smoke detector expiration date, or if it is old, it’s a good time to get a new one that abides by the modern manufacturing standards. Technology has improved a thousandfold to ensure property safety standards. Don’t deprive your home of the security for a few bucks.

Incorrect Installation Technique

You should never install smoke detectors near laundries, bathrooms, kitchens, or fireplaces. Unless you want them to go beeping every time you are whipping up some spicy cuisine. These areas have normal fumes that can activate the alarm. 

You will also face smoke alarms problems if you place them near fans or vents because they will blow away the smoke, and the alarm will never beep even if you have a strong fire going on. Also, don’t place them where the temperature gets above 100 degrees or below 32.

How To Temporarily Solve Smoke Detector Problems?

Before we get started, let’s make one thing very clear. Shutting up the smoke detector temporarily is never the solution, and you should only do it when you have ensured there is no bigger reason why the detector is going off. 

Using The Hush Feature To Silence Smoke Alarm Temporarily

Electric smoke detectors come with a hush feature, which temporarily shuts down the alarm circuit for around 8 minutes. If you are cooking, or know the exact reason why the alarm has become activated, you can use this feature. 

The clock resets after 8 minutes; by then, if the smoke particles have not been cleared, the alarm will go off again. If your alarms are hardwired, you have to hush the unit, which is initiating, and all other interconnected ones will shut down.

Keeping The Smoke Detector Clean And Resetting It

Take the initiating unit, which is in red or green flashing, and then follow the reset instruction for this unit. If you see no signs of smoke or fire, it’s a good idea to clean the alarm before you put it back. False alarms can be caused by debris or any other kind of interference. Remove the battery after disconnecting it, and vacuum the gaps all around the device. Blow some air into it. Then put back the battery and reinstall.

Rest Hardwired Smoke Detector With Removeable Battery Backup

Switch off the power to the circuit breaker. Remove the device from the mount and unplug the power outlet. Take off the battery. Click on the test to check. Then reconnect it to the power outlet. If power is restored, then the device should chip once and no more than that.

Detachable Battery Only Unit Reset

Take out the battery and press on the test button. Continue smoke detector installation by putting back the battery, and listen for the single-chip when it is connected.

Fixing A Loosely Installed Battery

Always ensure that you are using a recommended battery for the device, and it has been correctly installed. If the battery is jammed so tight that shimmying it does not take it off, then it is possible that the battery connector will not have proper connections. 

Disconnect and reconnect a few times to fix this issue. Also, ensure that the battery chamber door is well closed and sealed. 

Call a residential electrician from Proelectric if you are unsure how to do this.

Need Electrical Work?

Don't Wait. We Conduct In Fort Collins, Wellington, Loveland and Bellvue, CO.

We’re easy to talk to for all inquiries, questions, or comments. If you would like to know more about our services, don’t hesitate to reach out with the buttons below or call us (970) 222-4740